DZB100 Series
Digital Keypad Operation
3.2 Explanation of Screen Display
Explanation of Displayed Messages
Displayed Message
Description
Displays the AC drive output frequency controlled by the Maximum
Output Frequency (F1- 03), Jog Frequency (F1- 16), or by the
Multi-Function Input Terminals (F1-39-41).
If the frequency source originates from the Digital keypad, the user can
use either the
or
key to set the frequency.
Displays the output frequency present at terminals U, V, and W.
Displays the input voltage.
Displays the custom unit (n), where n = P * F1-.65.
Displays the internal counter value (r).
Note: Refer to Chapter 5, F1-45, 46, 63 - 66 for a detailed description
of the above.
Displays the output current present at terminals U, V, and W
Displays the specified parameter number. The actual parameter value
may be displayed by pressing the
FUNC
DATA
key.
Displays actual value stored within the specified parameter.
Press the
FUNC
DATA
key to store the value of the specified parameter.
The display will read Fd (as shown) for approximately 1 second if
the input has been accepted. After a parameter value has been set,the
new value is automatically stored in memory. To modify an entry, use
or
key.Then press the
FUNC
DATA
key.
-15-
