深圳市睿达科技有限公司
Press the “Y+/-” key to move the light blue cursor to the corresponding item and press the
“ENTER key to enter the corresponding submenu.
4.3.1 AxisReset+
When the green block is on this item, push the “Enter” key to show as below:
Figure 4.10
Push the “Y+/-“ Keys to move the cursor to one of the entry, then push “Enter” key to
restart the selected axis, the screen will show some information when resetting.
4.3.2 ManualSet+
When the cursor is on this item, push the “Enter” key to show as below:
Figure 4.11
Push “Y+/-” key to move the cursor, and when the green block is on the “Mode” item,
push “Y+/-”keys to select the anticipant value, “Continue” or “Manual”. When “Continue”
item is selected, then the “Manual” item is not valid, on that time, push the direction keys
to move the corresponding axes, and when the pushed key is loosed, then the
corresponding axes will finish moving. When the Mode item is “manual”, then pushing the
direction key one time, the corresponding axes will move a fixed length, unless the scope
is overstepped.
4.3.3 Mechanical Para
When the item is selected, it is displayed as follows:
14
