
1. Press the mode key once, see the “set light” turning red. Press the plus (+) or minus (-) key to set the initial
heating temperature.
2. Press the mode key for the second time, see the “temperature light” turning red. Press the plus or minus
key to set the highest heating temperature.
3. Press the mode key for the third time, see the “time light” turning red. Press the plus or minus key to set
the proper heating time.
4. Press the mode key for the fourth time, finish the setting and the machine is then on standby for work.
Attention:
The initial heating temperature should be set between 200-380, the highest heating temperature should be
set between 200-430. The timing should be set between 0-999 seconds.
IF the initial heating temperature is 230, the highest heating temperature should be set only between 230-
430. The same goes for if the highest heating temperature is 380, the initial heating temperature should be
set only between 200-380.
N.B. Initial heating temperature always =< highest heating temperature
Operation:
1. T-shirts and plates:
Preset the corresponding temperature and timing for the object that is going to be shaped, it needs a few
minutes to achieve the initial heating temperature.
When the temperature reaches the initial heating temperature, it will turn into constant temperature status
automatically. Press the executive key, then close up the pressure handle, wait the time which is set for
the object you are shaping, you will hear a hint sound, which indicates the pressing is finished, pull up the
pressure handle, press the executive key. Either then do the next object or turn off the power.
2. Mugs, Tiles, Metal board:
Preset the corresponding temperature and timing for the object that is going to be shaped. Put the object
into the machine, close up the pressure handle, press the executive key, the temperature will rise to the
highest heating temperature. Wait for the set time to pass, you will hear a hint sound, which indicates the
pressing is finished, pull up the pressure handle, press the executive key. Either then do the next object or
turn off the power.