EasyRoute Control Panel is based on Weihong NK105 CNC Integrated Machine OEM http://am.co.za/router/panel
上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
value changes with the feedrate override.
Spindle Speed Adjustment
Press
+
or
+
to adjust the spindle speed, which is divided into 8
gears from S0~S7 with speed increasing sequentially.
Suspend Processing and Jiggle
Suspend processing by pressing
during processing, running status at the top right corner
of the screen displaying “Pause”; at the same time, the machine tool stops; as for spindle, whether it
stops or not is decided by the setting of parameter “SOff at Pause”, see chapter 6.5.3 for details.
Whether spindle stops or not, at this time, the three axes can be jiggled, and the system default state
is “Stepping” mode. Each press of a direction key will make the corresponding axis move a specified
step.
Continue Processing after Pause
When the system is in the sate of pause, pressing the start key
will continue processing
from the pause position, running status at the top right corner of the screen changing from “Pause” to
“Run”; at the same time, the machine tool starts machining.
Software Limit Treatment
Software limit occurs when a processing axis exceeds the setting of “Machine Stroke” during
processing, and the system will display a limit dialog as shown in Fig. 8-7.
X Soft Limit
OK
ESC
Fig. 8-7 Software limit dialog
Press [OK] or [ESC] to exit from this warning dialog and enter processing page, and then
manually move the axis reaching software limit towards the reverse direction to release limit. After
software limit occurs, the system prohibits the limit axis from moving towards limit direction.
Hardware Limit Treatment
52
Specialized, Concentrated, Focused
