EasyRoute Control Panel is based on Weihong NK105 CNC Integrated Machine OEM http://am.co.za/router/panel
上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
Wiring Notices
Attention
¾ Only qualified people are allowed to participate in the wiring and checking.
¾ The CNC device should be grounded reliably and the grounding resistance should be less
than 4 ohm. Neutral line is absolutely not allowed to replace earth wire. Otherwise, the device
may be likely to work improperly due to the interference.
¾ Wiring should be firm and steady, or misoperation may occur.
¾ Voltage values and positive & negative polarity of any connection plug should be in
accordance with the manual, or such breakdowns as short circuit and device permanent
damage may occur.
¾ To guard against electric shock or the CNC device damage, fingers should keep dry before
plugging or touching switch.
¾ The connecting wire should not be damaged and squeezed, or the leakage or short circuit may
occur.
¾ It is prohibited to plug or open the chassis of CNC device when power on.
Running & Debugging Notices
Attention
¾ Parameters setting should be checked before running, since wrong setting may lead to
accidental movements.
¾ Modification to parameters should be within the allowable range, or such breakdowns as
unsteady running and machine damage will occur.
iv
Specialized, Concentrated, Focused
