EasyRoute Control Panel is based on Weihong NK105 CNC Integrated Machine OEM http://am.co.za/router/panel
上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
the park site under 2. “Park Site”.
After selecting “Select Site”, press [OK] key to enter its setting interface, and then press [OK]
again to set current position as park position. System will then back to the main interface
automatically. At this time, you can press “Processing Start” key to start machining directly.
Note:
Current position can not be set under “Select Site” interface; you need to set the current position of spindle in
advance.
6.5.3. Spindle Stop
Press “Menu” key→ select 4. Oper Param→ select 10. Spindle Stop, and then press [OK] key to
enter the setting interface of “Spindle Stop”, in which press “Up” or “Down” key to select the
corresponding parameter for modification. Three modes of spindle stop are shown in Fig. 6-9.
1. SOff at Pause
Yes
2. SOff at Stop
3. SOff at End
Fig. 6-9 Spindle stop setting interface
Specialized, Concentrated, Focused
27
    "