odification Direction of X Positive Negative 55 System (Page 29 / 87) CNC nk105

EasyRoute Control Panel is based on Weihong NK105 CNC Integrated Machine OEM http://am.co.za/router/panel

上海维宏电子科技股份有限公司

Weihong Electronic Technology Co., Ltd.

modification.

Direction of X

· Positive

Negative

5.5. System Start-up

Fig. 5-4 Selection dialog

The system interface is as shown in Fig. 5-5 after power on.

Booting the system...

Fig. 5-5 System start-up interface

After system boot-up, “Back to REF. Point” will be prompted firstly, as shown in Fig. 5-6. Please

press [ESC] to cancel this operation. You need to adjust the following related parameters: port polarity

(see chapter 6.3), pulse equivalent (see chapter 6.1), axial output direction (see chapter 6.1) and

machine stroke (see chapter 6.2) before executing returning to backing to reference point.

Back to REF.

Point?

ESC

Fig. 5-6 Prompt for backing to reference point at boot-up

Specialized, Concentrated, Focused