Duxe.ru VICSION VS500 77
It is used for setting some coefficients with special function in running process. Generally, user needn’t set.
The first part of LED(form right to left)： Under voltage compensation intensity
The second part of LED： Over voltage inhibit intensity
The third part of LED： Over current inhibit intensity
The fourth part of LED：Self-adapting braking torque adjust intensity
FC.5 Action function selection
Setting range： 0000 ~ 0111
The first part of LED(form right to left)： Cooling fan control
0：Cooling fan run after inverter run.
Cooling fan will stop after inverter stop. When temperature is above 40℃，the cooling fan also will also run.
1：Cooling fan will automatic run when inverter is power on.
The second part of LED：Reserved.
The third part of LED： Voltage over modulation
0：Invalid
1：Valid
The fourth part of LED：Reserved
FC.6 Auxiliary functions
Setting range：0000～0011
The first part of LED(form right to left)：Forbid to modify parameter.
0：Invalid.
1：Valid.
When it forbids modifying parameter is valid, [F0.18] will be invalid, if you want to get new password, please
ask for our service department. This function is used for preventing modify parameter wrongly.
The second part of LED：Input terminal effective level.
0：Low level (terminals is connected)
1：High level (terminals is disconnected)
The third part of LED: Reserved
The fourth part of LED：Selection of rotate speed display proportion
0: the coefficient of rotational speed display is valid
Rotational speed display=Rotational speed×Rotator speed coefficient setting (F6.11
1: the deceleration proportion is valid
Rotational speed display=Rotate speed ／ Rotator speed coefficient setting(F6.11)
FC.7 Reserved
FC.8 Agency password
FC.9~ FC.10 Reserved
FC.11 Oscillatory inhibiting factor
FC.12 Reserved
It iFsCre.1ad3-onPlyropgaramevteerr.sion
Setting range：0 ~ 9999
Setting range: 0.0~ 2.00
Range: 1600 ~ 1699
VS500 series of general purpose inverter Duxe.ru
    "