8 VICSION VS500
2. INSTALLATION GUIDELINES
2.1 Environme ntal requirements:
1. Be sure to install the inverter in a well-ventilated room.
2. Ambient temperature is from -10 to 40 . If the temperature is 40 to 50 , please
take out the lower cover to cool.
3. Please avoid putting the inverter in a high temperature and moist location. The humidity is
less than 90% and non-condensing.
4. Keep away from combustible, explosive material and caustic gas or liquid.
5. No dust, floating fiber and metal particles.
6. The inverter must be installed in a firm and no vibration location.
7. The installation plane should be solid and not vibrant.
If users demand any special installation, please contact us firstly
VS500 series inverter is hanging model, so it should be in vertical way. In order to ensure the air circulation around the
inverter to aid in cooling, there should be enough space around the inverter shown as Fig. 2-1-A. Add the air deflector
when apply the up-down installation shown as Fig. 2-1-B.
Fan ventilation
VS500
50mmAbove
! WARNING
1.Refer to the instruction manual before installati on
and operation.
2.Do not connect AC power to output termi nals UVW.
3.Do not remove any cover whi le appl ying power
and at least10min. after disconnecting power.
4.Securel y ground(earth) the equi pment.
50mmAbove
Above 120mm
Inverter
Air flow clapboard
Inverter
Fig2-1-A Interval distance
Fig2-1-B Multi-inverter Installation
2.2 Disassembly and assembly of the panel
Disassembly
Put your middle finger into “open hole”. Then gently press the fixed spring on the top of panel. Then pull outward to
remove the panel.
Assembly
Aim the fixed hook to spring clip at bottom of operation panel, then press the fixed spring backward. Then push
inward to the certain place. Shown as Fig. 2-2
VS500 series of general purpose inverter Duxe.ru
    "