IV Precautions
2. The motor’s temperature can be a little higher than that of industrial frequency
power during operation of the inverter, which is abnormal.
3. With long-term operation at low speed, the operation life of motor can be
affected due to the poorer heat dissipation effect. In this case, special
frequency inverter shall be selected or the motor’s load shall be decreased.
4. When the altitude is over 1000m, the inverter shall be derated. Increase of
altitude for every 1500 m shall be ground for derating by 10%.
5. If the operating environment is beyond the allowed conditions of the inverter,
please consult the manufacturer.
The inverter’s output terminal shall not be connected to any
filter capacitor or other RC absorption equipment.
4. Scrapping precautions
Following attentions shall be paid when the inverter and its components are
abandoned.
Explosion of the electrolytic capacitor: electrolytic capacitor in the frequency
inverter may cause explosion while burning.
Waste gas from plastic burning: harmful and toxic gas may be produced during
combustion of plastic and rubber products of the inverter.
Disposal: please dispose of inverters as industrial wastes.
5 To prevent the drive from demaged
1: please observe the (ESD) electrostatic prevention regulations while using the
product,otherwise the static electricity might cuase some damage of the inner
components.
2: do not try to do withstand voltage test on any part of the inverter because we
are using some precision components like EMC and lighting protection design,
they will have a highly chance causing performance degradation or even broken.
E500 Series Universal Low-Power Inverter
