Monitoring
code
d-10
d-11
d-12
d-13
d-14
d-15
d-16
d-17
d-18
d-19
d-20
d-21
d-22
d-23
d-24
d-25
d-26
d-27
d-28
d-29
d-30
d-31
Operating Panel 23
Content
Unit
Input terminal status
Module temperature
ºC
Analog output AO
V
Timer value
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
Reserve
First fault record
Second fault record
Third fault record
Forth fault record
Output frequency at the time of recent fault
Hz
Output currency at the time of recent fault
A
Output voltage at the time of recent fault
V
DC voltage at the time of recent fault
V
Module temperature at the time of recent fault
4.4 Simple operation of the inverter
4.4.1 Initial setting
(1) Channel selection for frequency input ([F0.00])
Inverter’s initial setting varies from each other according to different models.
When the parameter is set to 0, the inverter’s frequency setting will be set
through the panel digit.
(2) Selection of running command input channel ([F0.02])
The inverter’s initial setting varies according to different models. When this
parameter is set to [F0.02] =###0, the inverter’s start and stop control will be
completed through
RUN
STOP
key on the operating panel.
E500 Series Universal Low-Power Inverter
    "