Chapter 1 Product inspection and installment
1.5 Servo motor installation
1.5.1 The environmental conditions for installation
Ambient temperature: 0 to 40℃; Ambient humidity: less than 80 %( no dew).
z Storage temperature: -40 to 50℃; Storage humidity: less than 93 %( no dew).
z Vibration: less than 0.5G.
z Install the servomotor in well-ventilated place with less moisture and a few dusts.
z Install the servomotor in a place without corrosive liquid, flammable gas, oil vapor, cutting cooling liquid,
cutting chips, iron powder and so on.
z Install the servomotor in a place without water vapor and direct sunlight.
1.5.2 The method of installation
z For horizontal installation: In order to prevent water, oil, etc. from entering inside of the servomotor, please
put the cable connector downward.
z For vertical installation: if the shaft of the servo motor is in upward direction with a speed reducer, some
prevention measure shall be taken against entering inside of the servomotor by oil come from the speed
reducer.
z Motor shaft extension should be long enough, or may cause vibration while motor is in running.
z In case of installation or removing the servomotor, please do not hit the servomotor with a hammer,
otherwise the shaft and the encoder can be damaged.
4
