HSD
8.8.19
Kit of gauges to adjust sensors S1 and S4 HSK E63 (code HSD
3811H0739)
A
3811H0354 gauge sensor 1 READS (Q=18.25mm)
B
3811H0357 gauge sensor 1 DOES NOT READ (Q=18.29mm)
C
3811H0356 gauge sensor 4 READS (Q=18.01mm)
D
3811H0355 gauge sensor 4 DOES NOT READ (Q=17.97mm)
Figure 8.20 kit for sensors E63 code HSD 3811H0739
For the E63 version of the HSK spindles, the kit of gauges code HSD 3811H0739 is available.
The use of the gauges allows the immediate positioning of the HSK collet in the position in which
the sensors are regulated, thus allowing an adjustment that is not only quicker but also more
precise, given that the gauges have been produced with stricter tolerances compared with the
normal tool-holders.
Although it is possible to carry out the adjustment of the sensors without using the kit as described
in the previous paragraphs, HSD strongly recommends the use of the kit, in view of the importance
(for safety purposes) of the accurate adjustment of the sensors.
The thickness spacers shown in Figure 8.17 are identified by the indication of the thickness
engraved on their surface, or shown on their packaging label.
5801H0056 ______________________________________________________________ 172/183
    "