HSD
Loosen the eight 6x20 screws from the front
8.
flange
9.
Carefully unthread the shaft kit
8.2.2 Assembly procedure
2
1
Insert the shaft kit, taking care to align the
pressurisation holes on the kit (on the outer
1.
side surface 1) and on the statoric unit (inner
side surface 2)
Tighten the eight 6x20 screws (with knurled
2.
washer) on the front flange, and definitively
tighten with a torque wrench at 14Nm
Tighten the eight 6x14 screws (with knurled
3.
washer) on the semi-rings, using a torque of 10
Nm
Spread a layer of Loctite 510 (573) on the
4.
reaction flange
5801H0056 ______________________________________________________________ 132/183
    "