4.9.2 Rotate Engraving
【Enable rotate engrave】：After enable engraving，the actual precision of Y-axis will
be based on diameter and step per rotate to auto match the setting of pulse precision of
Y-axis. In addition, the work area in the main interface will also change.
【Diameter】：The diameter size of the parts.
【Step per rotate】：The number of pulse corresponds to the workpiece rotate one
week.
The function is to facilitate the users to replace parts, and different size of the
workpiece when the workpiece is not very different before use. When the relatively large
difference in size of the workpiece, it is recommended to use directly modify the motor
step approach to implementation.
Rotary engraving is only when using the rotation axis to replace the Y-axis use.
4.9.3 Feed Setting
To use the feed, must first enable the feed.
After set feeding parameters，the shaft will be feeding a feeding length, and repeat the
process , until the times of processing reach to number of feeding.
If the machine is not equipped with feeding devices, in general, enable the feed ban.
4.9.4 Optimization of Backlash Compensation
When the machine there is space (such as dislocation of the seal cutting graphics),
can be checked.
4.10 Layer Settings
Double-click the list in the layer to edit layers, layer parameters dialog box will pop up.
Layer parameters in two parts, part of the common layer parameters, namely, how both
types of processing layers, the layer parameters are valid, the other part is the proprietary
layer parameters, it changes in the layer corresponding to the type of processing
parameters will also change.
