14.Maintainance 机器部件保养
Linear slide maintenance: When the machine is in use for about 3 months, the linear slide block needs to be supplemented with lubricating grease once. The grease
can be injected into the slider with the aid of a grease gun from the grease nipple attached to the slider. Lubricating grease is suitable for occasions where the speed
does not exceed 60m/min and there is no requirement for cooling. It is recommended that customers use lubricating oil with an oil viscosity of about 32-150cst to
lubricate the linear slides;
线性滑轨保养：当机器在使用3个月左右，需对线性滑轨滑块进行补充润滑油脂一次，可借助注油枪由滑块上附件油嘴，将油脂打入滑块中，润滑油脂适用于速度不超过
60m/min,且对冷却作用无要求的场合，建议客户使用油黏滞力约为32-150cst的润滑油润滑线性滑轨；
Screw maintenance：When the machine is in use for about 3 months, the screw needs to be supplemented with lubricating grease once. You can use ordinary
brushes or tools that can lift grease. The lubricating grease is suitable for occasions where the speed does not exceed 60m/min and there is no requirement for
cooling. It is recommended that customers use lithium soap grease with a dropping point not lower than 258℃.
丝杆保养：当机器在使用3个月左右，需对丝杆进行补充润滑油脂一次，可借助普通毛刷或者能翘起油脂的工具，润滑油脂适用于速度不超过60m/min,且对冷却作用无要求的
场合，建议客户使用滴点不低于258℃的锂皂润滑油脂。
26
    "