4. Install the feed tube 安装下料管
1 Take a Phillips screwdriver, and use 2PCS-M3*8 Phillips pan head screws to fix the front transition plate of the feeding tube as shown in the figure;
取十字螺丝刀，用2PCS-M3*8十字槽盘头螺丝把下料管前面过渡板按图所示固定；
2 Then take the No. 2 Allen key, and fix the front transition plate to the position shown in the figure above with the 4PCS-M4*8 Allen head screw.
再取2号内六角扳手，用4PCS-M4*8 内六角平圆头螺丝固定前面过渡板到上图所示位置。
Cross recessed pan head tapping screws
｜十字槽盘头自攻螺丝 M3*8 x2
Hexagon flat round head screws
｜内六角平圆头螺丝 M4*8 x4
Gantry Frame｜龙门架 x1
6 Front transition plate of
material tube｜料管前面
过渡板 x1
05
    "