Figure 5 The dilution value of screening point is 4.0
In adjusting the dilution value of screening point, the parameters at the bottom of Figure
1 interface will change accordingly. After the adjustment, if 2bit parameter still fails to meet
the requirements, you can tick to open senior setting item o f 2bit and mildly adjust the small,
medium and large points of 2bit screening points.
1.The start position of medium point means the position where medium point begins to
appear, with an adjustment range of 0-100. If the value is 50, it means that medium point
begins to appear at the concentration of 50%. No medium point will appear in the positions
when the concentration is less than 50%;
2.The start position of large point, which is similar to the start position of medium point. It’s
noteworthy that the start position of large point should be higher than that of medium point.
Otherwise, an abnormal jump of concentration will occur as a whole;
3.Dilution degree of small point means the dilution degree in the concentration change of
small point, with an adjustment range of 0.0-1.0. The higher the value is, the higher the
dilution degree is;
4.Dilution degree of medium point, similar to dilution degree of small point, refers to the
dilution degree of concentration changes of medium points;
5.Dilution degree of large point, similar to the dilution degree of small point, refers to the
dilution degree during the concentration change of large points.
Senior Setting of 2bits only applies to a Variable Point Nozzle, which generally need
not be adjusted. It’s suggested to use default parameters. After the parameter setting, you ca n
use “Print Reference Diagram” to confirm whether the parameters are reasonable.
61 / 92
