CE6000
BLADES
UA blades are recommended for rigid medias due to their modified blade tip.
CB09UB
CB09UB-K60
CB15U
Angle 45° Diameter 0.9mm Supersteel blade for vinyl cutting, and self-adhesive marking film
(PVC film), up to 0.25 mm thick. The maximum cutting distance is approximately 13,123 Feet.
Angle 30° Diameter 0.9mm Supersteel Blade for cutting the window tint film or thin film, up to 0.25
mm thick.
Angle 45° Diameter 1.5mm Supersteel blade for cutting rigid or thicker media, 0.25 mm to 0.5 mm
thick. (laminates, smart device, device screen protection media)
CB15UA
Angle 45° Diameter 1.5mm Supersteel Blade for cutting high-intensity reflective film or harder film.
TOOL CONDITIONS FOR EACH MEDIA TYPE
SIMPLE MODE: INITIAL VALUE
Media type
Thickness (mm) Blade used
Force Speeed (in/s) Acceleration Standard Value Cut Force Speed (in/s)
Film for outdoor use
0.05 - 0.08 CB09UB
10 -14 12” or under
2
(12)+0
8”
Film for decorative use
0.08 - 0.1 CB09UB
14 - 17 12” or under
2
(15)+0
8”
Transparent or semitransparent film 0.08 - 0.1 CB09UB
14 - 20 12” or under
2
(17)+0
8”
Reflective film
0.08 - 0.1 CB09UB
14 - 20 12” or under
2
(17)+0
8”
Fluorescent film
0.20 - 0.25 CB09UB, CB15U 20 - 24 4” - 8”
2
(22)+0
6”
Car film
0.05 - 0.08 CB09UB-K60 14 - 20 2” - 6”
2
When a blade type has been selected, the OFFSET is automatically adjusted by ±5 with respect to the default cutter offset value for that
blade type. Select OTHER to use settings other than those displayed for hard-to-cut media. Select pen to set the plotting pen.
CE6000
BLADE-HOLDERS
Recommended control-panel setting for small-detailed character cutting:
OTHER Offset +31, Force 10-14, Speed 30 or less, Acceleration 2
CE6000-40 Plus, 60 Plus, and 120 Plus only. CB15U-K30 can not be selected as the tool type. Please select (OTHER) instead.
PHP31-FIBERSTEADTLER FIBERSTEADTLER Lumocolor holder.
PHP33-CB09N-HS
SPRING BUILT-IN TYPE
PHP33-CB15N-HS
SPRING BUILT-IN TYPE
Compatible with blades: CB09UB, CB09UB-K60
Designed for use with 0.9mm CB09UB Blades for vinyl and window tint film cutting.
Not recommended for CB09UA blades with springs.
Compatible with blades: CB15U, CB15U-K30, CB15U, CB15UA
For use with 1.5mm CB15 Blades.
PHP34-BALL
Ballpoint pen holder for black, oil based pen (KB700-BK).
PHP35-CB09-HS
SPRING BUILT-IN TYPE
Compatible with blades: CB09UB, CB09UB-K60
0.9mm Blade-holder with blue top, and brass tip / for 0.9mm CB09 blades. ATTENTION: If you
are using CB09UA Blade (with spring); Insert only the CB09UA blade without the spring. This
blade-holder, plunger design already includes an internal spring. These brass tip blade-
holder, plungers are more rigid and lend to more accurate cuts.
PHP35-CB15-HS
SPRING BUILT-IN TYPE
Compatible with blades: CB15U, CB15U-K30, CB15U, CB15UA, CB15U-K30
1.5mm Blade-holder with red top, and brass tip for CB15 blades. These brass tip blade-
holders/plungers are more rigid and lend to more accurate cutting.
NOTE: Remove CB15 SP Blade spring before installing into this Blade-holder. DO NOT install
any blade spring.
Revised 06-14-2019
    "