(1) check the interface between the camera and the USB connector is loose, and check the
connection line and the computer's USB port is in good contact, check the camera connection line
is broken, for the old computer, please check the computer's USB port driver is reliable, if it is to
replace the computer.
(2) check the camera connection line is bad, check whether the camera is broken, for the old
computer, please check the computer's USB port driver is reliable, if it is to replace the computer.
Light control problem
3.4 Problem phenomenon:
(1) a burst but no light;
(2) no light is produced in the process;
(3) the size of the light can not control;
Solution method:
(1) no burst of power or power set is too small.
(2) no setting power or power setting is too small.
(3) check the circuit wiring and control card with no signal output.
(4) check the laser power supply or laser tube
3.5 Machine no action
Problem phenomenon:
(1) the machine cannot move in the direction of the arrow keys;
(2) after the start of the power can not automatically return to zero;
(3) return to zero error;
(4) move in one direction only;
(5) the machine returns to zero after the start of the machine, and the control panel prompts the
system to start up.
Solution method:
70
