Page 28 of 49

Service Support Spirit
The socket which has 10 pin description:
Pin
Signal
Number
1.1
AUTO
1.2
UP
1.3
DOWN
1.4
IHSARCON
1.5
DIRARCON
1.6
TRANSFER1
1.7
TRANSFER2
1.8
COM
1.9
COLLISION
Content
Enabling height control automatic: in genal, the effective level is
low level. It connect the signal of closing height control, the
corner signal, angle of low speed signal and so on.
The signal of controlling torch lift: in genal, the effective level is
low level. CNC control THC by this port, and control torch lift.
The signal of controlling torch decline: in genal, the effective
level is low level. CNC control THC by this port, and control torch
lift.
IHSARCON The IHSARCON signal: in genal, the effective level
is low level. When CNC make torch work, it can output low level
to this port, THC can start IHS and make arc start work.
The DIRARCON signal: in genal, the effective level is low level.
The output piercing signal of finished: after arc start has
worked and piercing delay time is over, if CNC detect arc voltage
effectively, it will make TRANSFER1 and TRANSFER2 close.
The contactor is a disconnected contactor of relay. The port is a
feedback signal which arc start has worked successfully.
Pin named 1.1、1.2、1.3、1.4、1.5、1.9 use this port as
control signal com, it connect with signal of CNC.
Input collision signal: opened and leaky output, it need
connect the load exteriorly. If THC detect signal which collision
has happened, this pin will output level signal. After CNC
has receive collision signal, torch can be stopped to work.
Unique Solution
WWW.ARCBRO.COM
28
    "