Page 38 of 40
![](LaserMaster%20Versatile%2C%20FWH20-S10A%20Intelligent%20Single%20Pendulum%20Handheld%20Welding%20Head%202022-01-19%20A.pdf-38.html%20-%20foldersweb.png)
修正,不需要修正时,一般设置为 1。
镜片温度报警使能:使能镜片温度报警,当温度超过限制值时,会产生
报警信号。
镜片温度报警限值:镜片温度限制值。
激光报警使能:使能激光器报警,当激光器产生报警时,会产生报警信号。
激光报警电平:激光机报警逻辑电平。
冷水机报警使能:使能冷水机报警,当冷水机产生报警时,会产生报警信号。
冷水机报警电平:冷水机报警逻辑电平。
欠压报警使能:使能气体报警,当气体欠压产生报警时,会产生报警信号。
欠压报警电平:欠压报警逻辑电平。
Diagnosis: to monitor the IO status of current system
Device parameter: used to set parameters related to device
Laser rated power: used to set the rated power of laser
Maximum deflection angle of galvanometer: used to set the range of the maximum deflection angle
of galvanometer.
Maximum frequency: set the maximum frequency of laser PWM signal. When PWM frequency set
by welding parameter exceeds the maximum frequency, the frequency will be limited to the maximum value.
Maximum swing length: set the maximum length during swing. When the length set by welding
parameter exceeds the maximum length, the length will be limited to the maximum length.
Wire feeding step: used to set the step during motor wire feeding.
Direction of motor wire feeding: used to set the direction polarity of motor wire feeding.
Galvanometer correction coefficient: when there is a nuance in the set length and the actual length, it
can be modified by this parameter. When there is no need for correction, it is usually set as 1.
Lens temperature alarm enable: enable lens temperature alarm. When the temperature exceeds the
limited value, the alarm signal will be generated.
Lens temperature alarm limited value: the limited value of lens temperature
Laser alarm enable: used to enable laser alarm. When laser generates alarm, the alarm signal will be
generated.
Laser alarm level: used to set laser alarm to trigger the level logic.
Water-cooling machine alarm enable: used to enable water cooling machine alarm. When the water
cooling machine generates alarm, the alarm signal will be generated.
Water-cooling machine alarm level: used to set water-cooling machine alarm to trigger the level logic
Low pressure alarm enable:used to enable gas alarm. When gas low pressure generates alarm, the
alarm signal will be generated.
Low pressure level: used to set low pressure alarm to trigger the level logic.