Page 33 of 40
![](LaserMaster%20Versatile%2C%20FWH20-S10A%20Intelligent%20Single%20Pendulum%20Handheld%20Welding%20Head%202022-01-19%20A.pdf-33.html%20-%20foldersweb.png)
报警、激光报警与温度报警状态进行实时显示,启用安全锁则实时显示安全锁状
态; 当报警信号未触发时,相应报警状态前为蓝色; 产生报警时,对应的报警图
标会红蓝交替闪烁。
【主页面】【送丝参数】【诊断】 【系统参数】:显示当前页面参数的参数
类别,点击对应图标可进行对应参数页的切换。例如: 主页面图标变亮,说明当
前显示区域的参数为主页面的参数; 需要切换到送丝参数时,点击送丝参数位置
则切换到送丝参数页,对应的送丝参数位置会变亮。
【手动吹气】【送丝机】:手动进行吹气测试和送丝机的送丝与退丝测试。
例如: 长 按 手动吹气区域则一直进行吹气,松开手动吹气区域则关闭吹气,手
动 送丝与抽丝则长按对应的小三角箭头。
Bluetooth logo: to show whether this device is connected with the mobile terminal
through bluetooth.
Swing off: to set galvanometer motor swing on or off
Safety lock: to start or close the safety lock. When the lock is started, during the
welding,the laser will stop when the welding head does not touch the welding material.
Automatic wire feeding off: to control whether to start automatic wire feeding
during welding. It will start automatic wire feeding only when laser emits light.
Emit laser: to start emitting laser or stopping emitting laser
Alarm status area: when alarm signal enables, protective gas low pressure, cool
water flow alarm, laser alarm and temperature alarm status will be displayed in real
time. When the safety lock is started, its status will be displayed in real time. When the
alarm signal is not triggered, the alarm icon is blue; when it is triggered, the alarm icon
is blue and red alternately.
Homepage/ Wire feeding parameter/ Diagnosis/ System parameter: to display the
type of parameter on the current page. Click an icon to enter the switch of the
corresponding parameter page. For instance, if the icon on the homepage turns on, the
parameter in the current display area is the parameter of the homepage. When it needs
to switch to wire feeding parameter, just click the position of wire feeding, and the
icon of this parameter will turn on.
Blowing manually/ Wire feeder: for manual blowing test and the wire feeding and
wire withdrawing tests of wire feeder. For example, long press manual blowing key,
and it will blow all the time; loosen this key, and it ill stop blowing. For manual wire
feeding and wire withdrawing, long press the corresponding small triangle area.