4.3.3 保护镜片拆装Disassembly of protective lens
拆装过程需要在洁净的场所完成,拆装镜片时必须带上 无尘手尘或无尘指
套。
The assembly and disassembly of lens should be operated with hands wearing dust-
free gloves or fingertips in clean environment.
操作方法:Steps:
更换保护镜01
第一步,用手拿着绿色抽屉模块 1手柄两侧面,水平方向抽 出保护镜片后。注意
防尘,用美纹纸封好腔体上露出的窗口, 防止灰尘进入腔内受到污染,再更换保
护镜片。
第二步: 压盖轻轻向下压旋转90°,当两处耳端两处槽口对 齐即是松开,取出压
盖,更换保护镜片。
更换保护镜02
第一步: 取出绿色抽屉手柄模块1,水平方向抽出手柄模块 2。注意防尘,用美
纹纸封好腔体上露出的窗口,防止灰尘 进入腔内受到污染,再更换保护镜片。
第二步:压盖轻轻向下压旋转 90°,当两处耳端两处槽口对齐即是松开,取出压
盖,更换 保护镜片。
水平抽出
Change protective glass 01:
Step 1: hold both sides of the green drawer handle module 1 in hand and pull out the protective lens horizontally. Take care
of the dust, seal the port exposed on cavity with masking tape to stop the entry of dust into the cavity and replace the
protective glass.
Step 2: the cover is gently pressed down and rotated 90°. Loosen it when the two sides align with the two notches. Take out
the cover and change the protective lens.
14
    "