Handle the Fibre Optic Cord and Components with Extreme
Care. Bending the Fibre Optic cord or applying extreme force
to the cord or ber components will cause the glass inside
the optical bre cord or components to shatter. The damage
is irreversible resulting in the cord or components having to
be replaced. The bre laser power will be trapped or can leak
from the breaking point and will prevent the machine from
working. It can also result in additional and costly damage.
Please be extremely careful of the layout of the cord. If the
cord or components become damaged, they can only be
xed by sending the laser power supply to the Original
Manufacturer where they must be xed in a special lab. The
cost of repair is very high and takes a very long time. It is
important to note that the damaged laser cord or compo-
nents, or any additional damage will not be covered by the
warranty.
Lenses are consumables that need to be replaced when damaged. Failure
to change damaged lenses may result in other components melting and
we cannot be held responsible nor provide warranty for such damages.
For a high power laser like this one, dust and/or any other object on the
lens will melt and stick onto the lens, causing damage to the lens. When
exchanging any lens, please make sure the environment is clean. NEVER
touch the lens with your hands. Always use a lens wipe to handle the lens.
When it's time to take the laser power supply connector out for a torch
change, make the process fast and make sure the environment is as clean
as possible.
Never remove any bolts, screws or nuts that are not mentioned in our
video guide. Once dust gets in, the components are un xable.
Dust is a big problem for optical systems so please take extreme caution.
Further caution and operation skill is still needed from your side to avoid
burning the torch or laser power supply. Dust free and dry air of 4 bar is
required for all applications, and you need to cap any outlet when air is
o.
