______ HSD __________________________________________________________________________________
1 INTRODUCTION
1.1 PURPOSE
This manual contains important instructions and precautions, and must accompany the electro-spindle at all times since
it is essential for the safe operation of the electro-spindle.
Keep this manual safe, and ensure that all persons involved with the electro-spindle know of it and have access to it.
The safety precautions contained herein are designed to ensure the safety of all persons exposed to the residual risks
associated with the electro-spindle.
The instructions contained herein provide information necessary for the correct operation of the electro-spindle, as
required by the manufacturer.
If any information given in this manual is found to be in conflict with applicable safety regulations, contact HSD S.p.A., on
+39 0721.439.638 to request the necessary corrections and/or adaptations.
Make sure that you read and fully understand all the documentation supplied with the electro-spindle to avoid incorrect
operation of the unit and unnecessary risks of personal injury.
Keep this manual in a suitable place near the machine, where it will always be readily available to operators for
consultation.
THE ELECTRO-SPINDLE MUST ONLY BE USED FOR THE PURPOSE FOR WHICH IT IS DESIGNED. SAFE OPERATION
DEPENDS ON THIS.
i
SAFETY ALSO DEPENDS ON CORRECT INSTALLATION OF THE ELECTRO-SPINDLE, AS DESCRIBED IN THE FOLLOWING
SECTIONS OF THIS MANUAL.
THE INFORMATION GIVEN IN THIS MANUAL IS THEREFORE ESSENTIAL TO ENSURE THAT THE ELECTRO-SPINDLE IS
INSTALLED AND USED SAFELY AND CORRECTLY.
1.2 GENERAL SAFETY SYMBOLS
In this manual, important instructions or precautions are marked with the following symbols:
WARNING: IDENTIFIES SITUATIONS THAT COULD LEAD TO PERSONAL
INJURY.
i
IMPORTANT: IDENTIFIES PARTICULARLY IMPORTANT INFORMATION.
Y580100001 rev.03 _____________________________________________________________________ 4
