Functional Details 65
F6.06 Liner cutting running mode
Setting range: 0 ~2
This parameter is used to select if it is needed to enable liner cutter function.
0: Disable cutter function
1: Liner cutter mode 1(this mode is applicable to high-speed wire mode)
2: Liner cutter mode 2 (this mode is applicable to the medium-speed wire mode)
F6.07 Forward time
F6.08 Return time
Setting range: 0~60.0Sec
Setting range: 0~60.0Sec
This group of parameters defines the forward and backward time in the next cycle
in the reciprocating mode.
F6.09 High-frequency relay start frequency Setting range: [F6.10]~100%
F6.10 High-frequency relay disconnection frequency 1 Setting range: 0~[F6.09]
F6.11 High-frequency relay disconnection frequency 2 Setting range: 100~200%
This group of parameters is used to set the conditions for engaging or disengaging
high-frequency relay.
When the inverter’s output frequency is higher than the frequency set by [F6.09]*,
the high-frequency relay is engaged. When it is lower than the frequency set by
[F6.10], the high-frequency relay is disengaged. In the liner cutting mode 2, when
the inverter’s output frequency is higher than frequency set by [F6.11], the high-
frequency relay is disengaged.
E550 Series Universal Low-Power Inverter