(band-type
brake) tightness
the positive pole of the relay coil.
After the motor is enabled, the coil of the intermediate
relay is able to receive the electrical level of +24V;
otherwise +24V is disconnected from the relay.
Example: Pin 31 is connected to 0V and Pin 30 to the
negative pole of the relay coil.
After the motor is enabled, the coil of the intermediate
relay is able to receive the electrical level of 0V;
otherwise 0V is disconnected from the relay.
● Electrical level inversion or normal open/ normal
close switching can be done via Parameter PA57.
● PA47 is used to set delayed switching on of the
band-type brake.
● PA48 is used to set enabled delayed switching off.
33
    "