Page 18 of 49

made by pen,
(5) Then press
or
to save the settings.
NOTE: The settings will be stored in plotter all the time until you clear it.
4.6 Test the distance between red dot and pen
To test the distance from laser to pen is exact or not
(1) Press
or
button goes to the interface
.
(2) Fix the sheet and pen and press pen to make a dot on the sheet.
(3) Press
or
button, the red dot will locate the dot automatically, if the red
dot don't aim at the dot, It needs to be reset.
4.7 Skin of LCD and Step distance of jog motion
, , , are continuous motion keys.
, ,,
5.0mm.
are jog motion keys, You can set the distance of motion here, default is
(1) Press
or
(2)
button goes to the interface
Skin
Distance of
motion
or
Change the skin of LCD,
there are 6 skins available
or
Decrease the distance of
or
motion, the min is 0.1mm
Increase the distance of
or
motion, the max is 100. 0mm.
(3) Then press
or
to save the settings.
4.8 Cutting from FLASH
The plotter has a built-in FLASH, Every file sent by computer will be saved in the built-in
FLASH automatically. If it powered off, the file will not be lost, you can reuse it for cutting
and no need to be sent by computer again.
(1) Press
or
goes to the interface
.
18
    "