Laser Engraving & Cutting Control System Manual

Select JOG SET and press ENTER:

Press ∧ ∨ to set parameters. Press ENTER to confirm and return to the supporting interface. The default value (0) starts

moving upon pressing < > ∧ ∨ , and stop when stop pressing. If the value is not 0, laser head starts moving a fixed distance

at high speed.

4.5.4 IP Set

a). Press < > to move the cursor and press ∧∨to set parameters, setting=1.

b). Machine ID: When several machines are controlled by one software, the Machine ID should be set on the PAD panel.

Advisably, the IDs for the different machines should be different.

c). IP Mode: There are 2 modes to set the IP address of the controller: Auto and Static/Manual. ‘AUTO’ is the default.

d). When the mode is ‘STATIC/MANUAL’, you can input any number to identify different machines.

e). By ‘STATIC/MANUAL’ mode, the computer can communicate with the controller in 1 second; and by ‘AUTO’ mode, it

should pick the machine in approximately 10 seconds.

f). If there is a router between the computer and the controller, the computer will be able to liaise with the controller in 1

second whether the mode is ‘AUTO’ or ‘STATIC/MANUAL’.

4.5.5 Screen Protect

Select SCREEN PROTECT by with the mouse and press ENTER:

56