Laser Engraving & Cutting Control System Manual

intensively.

H). Y Acceleration: It’s the acceleration of the Y-axis from the start speed to the operating speed.

i). X Offset: It’s applied only to a Servo Motor. When servo motor is chosen, offset will be generated between the

engraving and the cutting positions. It is to compensate offset on the X-axis in engraving.

j). Y Offset: It’s applied only to a Servo Motor. When servo motor is chosen, offset will be generated between the engraving

and the cutting positions. It is to compensate offset on the Y-axis in engraving. Click ‘OK’ to set different process

parameters according to different speed ranges.

3.7.3 Application Parameter

3.7.3.1 Import Data Parameters

In the above dialog box, select (tick) an option and the system will implement a relative operation when importing data.

3.7.3.2 Auto sort mode

a). Inside first: The inside graph will be cut first and then the outer.

b). Knife mold: This mode is only applied for the knife mold machine.

3.7.3.3 Auto Separation 2-Head

a). Auto Separation 2-Head Machine: This option can only be chosen when the machine is an automatic separation

machine.

b). 2-Head Mode: Choice of the location of the auxiliary laser head is on the LEFT or RIGHT according to the structure

of the machine.

c). Min Distance between 2 Heads: Input the distance of the two laser heads according to the structure of the machine.

d). Separation Type: There are 2 options: Auto and Semi-Auto.

e). Speed of Separating Head:

46