3.7.2.4 Advanced CFG

Laser Engraving & Cutting Control System Manual

a). Enforce go home before work: It determines whether the laser head automatically goes back to the original point when

putting the power system ON. Without choosing this option, the jog speed of the laser head is relatively slow. This will

avoid it striking the machine. Or the jog speed will be quicker and you need not worry about the laser head striking the

machine.

b). Enable Breakpoint Protection: When choosing this option, the system will record the coordinates value of the laser

head when the power is OFF. When the system is re-powered, the system will remind user to continue with the process or

otherwise.

c). Breakpoint Back Distance: This is effective when the break-point resume function is selected. The laser head will move

back a certain distance when re-powered, to ensure the line can join smoothly with the other line before the power went off.

d). Enable Water Protect: You tick this option to detect the water protect signal. The system will pause the processing.

e). Min Distance of Blowing Off: The system WILL NOT close the blowing when the space between two graphic units is

less than the value.

f). Feed Dir: This function is used to set the moving direction of the feed axis.

g). Feed Compensate: It is the additional distance of feeding. A positive value means feeding more and a negative value

means feeding less.

h). Output Type:

a). Output by Layer: When there are MANY layers, the system will process the graph layer by layer.

b). Output by Object: When there are MANY layers, the system will set the process sequence as one layer while the

processing parameters of each graphic unit (i.e. speed, power) will refer to the processing parameters of the layers.

43