Laser Engraving & Cutting Control System Manual

3.7.1.12 FeedEx

If the machine has an automatic separation 2-head, the Z-axis should be used as a 2-Head and the feedex can be used as

feeding axis.

3.7.2 Controller Parameter

3.7.2.1 Controller Model

It is determined by the controller in the machine. For the TRUCUT CONTROL MOTHERBOARD, choose the

TRUCUT CONTROL MOTHERBOARD in the drop-down list of the Controller Model. Please replace the DLL of the

controller when changing the controller model.

3.7.2.2 Coordinates System

a). Space Speed: It is the highest speed of the laser head in the process when the laser is off.

b). Space ACC: It is the acceleration when the machine is moving on quick speed.

c). Start Speed: It is used for space moving and cutting.

d). ACCACC: It is the acceleration of the acceleration when space moving and cutting.

3.7.2.3 Signal CFG

a). Home Limit IO Level: Sets the effective level of the original signal.

b). Laser Frequency: It controls the PWM Frequency of the laser power. It can be adjusted between 200Hz－200KHz.

c). Laser Power Control Mode: Sets the Mode of the laser power control. It includes:

1). Single Analog Quantity,

2). Double Analog Quantity, and

3). PWM Control.

d). Max Laser Power (%): It is used to Restrict the Maximum Output of the laser tube. If the value is 80%, when

processing power is 100%, the actual output is going to be 100%*80%=80%.

42