4.8 Test
RDWork Laser Engraving Cutting Software V1.3
Axis control, can only control one axis each time. You can set the information for axis move, including
move length、speed、laser on-off and laser power.
If you check “Move from origin”, then the offset you set means the offset to machine zero.
If you not check move from origin, then the offset means the offset to the current position.
The X-axis, for example, assuming the current position is 100mm, such as the step distance is set to
10mm, then the exercise once, the new location will be 110mm, such as the check moves from the origin,
movement time, the new location will be 10mm, and repeated Movement, location will no longer change.
Note: According to the provisions of the controller, the absolute position is no negative in the whole
breadth. If you check the Move From Origin, and set the offset value negative, then the machine will hit
limiter.
SHENZHEN RUIDA TECHNOLOGY
57