RDWork Laser Engraving Cutting Software V1.3
Click 【Edit】->【Set cut point】, to enter the edit mode of the cutting point. Then select the curve that
should be edited, you can double-click on the node that you want to set the cutting point to complete the
change of the cutting point.
2.13.2 Setting And Editing The Cut In/Cut Out Lines
Drawing or importing curves, the curve is default not have any cut in/cut out lines.
If want to add cut in/cut out lines,select the objects，then click【Edit】->【Edit cut in property】，
or click .The following dialog box is appear.
To make cut in/cut out lines, first of all need to enable the cut-in/cut out function.
There are two types of the cut in/cut out lines: straight line and arc
Straight line cut in achieve through three ways:
Cut in with angle: cut in line and starting segment into a certain angle ， counterclockwise angle is
positive
Cut in at center，the starting point of the cut in line is at center.
Cut in from center，the direction of the cut in line is from center to starting point, and length is as
setting.
Cut out line
Cut in line
The arc length of cut in arc is as setting.
SHENZHEN RUIDA TECHNOLOGY
25
