RDC6685U(-DFM) Control System manual

The operation method is the same as manual setting.

When “Continue” item is selected, then the “Laser time” item is not valid, on that time, push the

Laser key to splash the enabled lasers, and when Laser key is loosed, then the lasers will finish

splashing. When the Laser mode item is “Manual”, then pushing the Laser key one time, the enabled

lasers will splash a fixed time.

8.7.5 Diagnose

Select the "Diagnose" entry under the funtions interface, press the <Enter> button, and

then pop up the interface as follows:

Figure

8.7.5

The interface displays the hardware IO information of the system, and reads the hardware

information of the system by pressing the <Enter> key. When the hardware signal is triggered, the

small box on the left side of the corresponding entry will show red. Otherwise, it will show gray.

Press the <Esc> key to return to the previous menu.

8.7.6 Laser power infomation

Note: laser power information function is effectively configured on PC software.

Select the "Laser power info" entry under the funtions interface, press the <Enter> button, and

then pop up the interface as follows:

SHENZHEN RUIDA TECHNOLOGY

53