RDC6685U(-DFM) Control System manual

Figure

8.6.3

When modifying the first parameter, press the <Enter> key to enter the modification mode

("blue selection block" right side becomes ), press the "Up/Down" key to modify, and then press

the <Enter> key to exit the modification mode. Press the direction key to select other parameters

and press the number key to modify the parameters. After the modification, move the "selection

block" to the "Write " entry and press the <Enter> key. The parameter setting takes effect. Press the

<Esc> key to return to the previous menu.

8.6.4 IP Setting

Select the "IP setting" entry under the controller setting interface, press the <Enter> button,

and then pop up the interface as follows:

Figure

8.6.4

Press the direction key to select a parameter, then press the number key to modify the

parameter. After the modification, move the "selection block" to the "Write" entry and press the

<Enter> key. The parameter setting takes effect. Press the <Esc> key to return to the menu at the

previous menu.

SHENZHEN RUIDA TECHNOLOGY

48