Software quick instruction is the first time to use contact the system, through some simple operations, you

can make the system run normally. Even novices can get a preliminary understanding of the entire system

relatively quickly. Quick operation is basically divided into connecting the system, creating processing data

(including some graphics processing), manual movement, and automatic processing.

4.1 Connect the system

Open the software, if the system has been set last time, it will automatically connect, otherwise there will

be a connection failure. There are two main reasons for connection failure. One is physical connection problem

(the computer and the system are not wired, or the wiring is loose, or the physical interface is faulty). The second

is that the setting of the connection port is wrong (the physical wiring is a network cable, but the USB connection

or IP address is set incorrectly, and the physical connection is the network connection set by the USB or USB port

is set incorrectly). If the computer only connects to one machine and uses a USB port, directly use the automatic

option, otherwise user have to select a specific USB port.

Figure: Connection failure prompt interface

When multiple machines are connected to one computer, please name the different machines through the

connection settings, and operate different machines by checking different connection options. One computer

can only establish connection with one machine in one time.

Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 67

202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA