The graphics to be processed are downloaded to the control system in the form of files, and the processing

of the files can be started directly from the HMI. The downloaded data includes user parameters, layer

parameters, processing data and necessary logo data.

Downloaded file name: Set the name of the downloaded file. The length of the file name cannot exceed 8

characters (the Chinese characters cannot exceed 4).

Cycle processing: Check it here to download the file for cycle processing.

Save offline files:

The processing file can be saved to the computer or U disk, and the file is saved in .rd type. You can copy it

out, and use the “Download Offline File” in the file management function of the software to download the file to

the system connected to the software.

3.4.5 Z axis lift control usage

一、 Basic parameter setting

Vendor parameters: First, set the parameters correctly in <Vendor Parameters> — — <Machine

Configuration>——<Z Axis Configuration> according to the equipment structure.

User parameters: If the Z axis is controlled by a motor, you need to set the Z axis focal point coordinate

position first, manually move the Z axis lift so that the laser focus point is on the cutting table plane, and record

the Z axis coordinate position at this time and fill in it. Then manually move the Z axis lift to keep the cutting

head away from the table to ensure that the Z axis is in an absolute safe position. Record the Z axis coordinate at

this time as the Z axis stop point and fill it in. Finally, set lifting and dropping delay.

Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 63

202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA