Feed

Focus

parameters

Used for automatic absorption, after the system processing is

Absorb off delay

completed, the adsorption will be turned off after a period of

delay

Feed counts

Feed length

Use and set the number of feedings during automatic feeding

U axis distance per feeding

The time can be set from 0 to 300s. When the previous working

is completed and the value is delayed, the feeding axis starts to

Delay before feed move. During the delay period, it is convenient for users to load

and pick materials on the feeding device.

The time can be set from 0 to 9.9s, which is convenient for the

Delay after feed

feeding device to move in place, delay de-jitter, and wait for the

feeding shaft to be completely stationary before performing the

second work.

Set whether to continue feeding after the last feeding process is

Finish feed enable completed

The Z axis is working in the motor mode, and the Z axis is

Focus position

controlled up and down so that the laser focus is on the Z axis

coordinate of the cutting table.

After the Z axis single lift is enabled, it will only lift once during

Enable single lift of the whole processing process, and the lift setting in the layer

Z axis

parameters is invalid.

When the Z axis lift is controlled by motor, after enabling the Z

Offset height

axis single lift, the Z axis focusing will keep the distance between

the laser focus and the table.

Z axis docking

point

Enable the Z-axis to lift backward, the Z-axis docking position of

each process completed

Lifting action means that the cutting head is separated from the

Lift delay

table. After the Z axis automatically lifts, it will delay for a period

of time before proceeding to the next step to ensure that the Z

axis moves in place.

Falling action means that the cutting head is closed to the table.

Down delay

After the Z axis automatically drops, it will delay for a period of

time before proceeding to the next step to ensure that the Z axis

Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 57

202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA