settings for idle speed and idle acceleration can shorten the

overall working time of the graph, but too large a setting may

cause a jerky trajectory.

Idle acceleration

factor

This parameter reflects the speed of acceleration change during

unprocessed motions.

Corner speed

The speed during processing at the corner and it is also the

minimum speed in the whole processing process.

The acceleration during processing at the sharp corner. If the

turning speed and turning acceleration are set too large, the

Corner acceleration turning will be jittery. If the setting is too small, it will affect the

trajectory speed. Turning acceleration is the minimum

acceleration value in the whole graphics processing.

Corner factor

This parameter reflects the turning speed when processing arcs

of various curvature.

Processing

acceleration

Processing

acceleration factor

Idle delay

The highest acceleration value during the whole processing.

This parameter reflects the speed of acceleration changes during

processing.

If this parameter is 0, there will be no delay after idling,

otherwise the speed will be reduced and delayed after idling.

Z axis working

speed

U axis working

speed

Pulse mode

Pulse time

Pulse power

Pulse power

Speed when Z axis is working

Speed when U axis is working

Set pulse mode, there are continuous/pulse optional

When the mode is <pulse >, the time for a single laser on

Laser on control signal power

laser on control signal power

Backlash of X axis. Set this value according to whether the

X axis backlash

machine actually has backlash, accurate to 1um, if the value is

not zero, the mainboard will compensate for the backlash.

Backlash of Y axis. Set this value according to whether the

Y axis backlash

machine actually has backlash, accurate to 1um, if the value is

not zero, the mainboard will compensate for the backlash.

Power of first pulse This power is used for processing during the suppression

Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 54

202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA