Maximum following

error

Y axis dual-drive

enable

The maximum allowable motor lag.

It is used to enable whether the Y axis of the machine is a dual-

drive structure

If the dual-drive synchronous alarm is enabled, protection will be

Dual-drive

configuration

Dual-drive

synchronous alarm

enable

generated when the dual Y axis is misaligned; if the dual-drive

synchronous alarm is disabled, no protection will be generated

when the dual Y axis is misaligned.

Dual-drive

synchronization

error

If the dual-drive synchronous alarm is enabled, when the Y-axis

dual-drive misalignment difference is greater than the dual-drive

synchronization error, protection will be generated;

When this signal is enabled, a low-voltage signal needs to be

Grating protection continuously input from the outside to the corresponding

enable

hardware interface, otherwise an alarm will prompt during

processing

When this signal is enabled, a low-voltage signal needs to be

Open cover

continuously input from the outside to the corresponding

protection enable hardware interface, otherwise an alarm will prompt during

processing

When this signal is enabled, a low-voltage signal needs to be

Machine

configuration

Water protection

enable

continuously input from the outside to the corresponding

hardware interface, otherwise an alarm will prompt during

processing

Whether to enable the Y axis pressing rod control. If it is enabled,

Press control

enable

check it. When the Y axis pressing rod control is checked, also

can choose whether the absolute origin of the machine is above

or below the machine table.

Unidirectional/bidirectional optional. When it is unidirectional

feeding, it can always feed in one direction without checking the

coordinates; When bidirectional feeding is selected, the system

Feeding mode

will check the maximum and minimum coordinates. Feed

materials in one direction at odd times, and feed materials in the

other direction at even times. The initial direction of the first

time can be changed by setting the direction polarity or

Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 50

202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA