Figure: Compensation setting interface

Turning processing: Represents the connection method adopted by the compensation line.

Micro-joining

There are manual micro-joining and automatic micro-joining. The micro-joining is to prevent the cut

graphics from falling down (turn off the laser at the set micro-joining position).

）

Manual micro-joining is realized with the left mouse key. Click the micro-joining button to enter the

state of manual add micro-joining. According to the interactive window prompt in the bottom left corner, click on

the graphic primitives to add a micro-joining at the clicked position. The size of the micro-joining is the size set

during automatic micro-joining. (Status operations press the ESC key to exit)

Auto micro-joining can choose to add micro links automatically by quantity and by interval distance. By

quantity is to add a specified number of micro links on the selected graph; by interval distance is to add a micro

link at such a long interval according to the set interval size.

Figure: Automatic micro-joining setting

Direction setting:

Reverse the selected graphics, and set the direction of the graphics to be clockwise or counterclockwise.

Web：www.rd-acs.com | TEL/FAX：0755-26066687/26982287 33

202-203, B-Block,Technology Building, 1057 Nanhai Avenue,Nanshan District,, SHENZHEN, CHINA