the parameters are set select Write Parameters and (Page 57 / 63) RDC6432G Laser Control System User Manual V1.1

RDC6432G control system user manual V1.1

7. After the parameters are set, select [Write Parameters], and press [Enter] to save the parameter

settings.

8.6.3 Feeding parameters

In the above interface, select the "Feeding Parameters" item and press [Enter] key, then the pop-up menu

is shown as below:

Figure 8.6.3

1. Press the arrow keys to select [Read Parameters], and press the [Enter].

2. Press the arrow keys to move the red box, press [Enter] to confirm the setting of the current red box

parameters, press the key to increase the value of the underline, and press the key to reduce the

value of the underline.

3. After the modification is completed, press [Enter] to save the current parameter settings.

4. After the parameters are set, select [Write Parameters], and press [Enter] to save the parameter

settings.

8.6.4 Memory operation

Select the "Memery oper" item in the interface above, and the pop-up menu is as shown below:

Figure 8.6.4

SHENZHEN RUIDA TECHNOLOGY