RDC6432G control system user manual V1.1
Figure 8.5-1
Press the panel direction keys , , , to select the parameter to be set, the selected
parameter box will change from black to red. Press [Enter] key to enter the Submenu, and press [ESC] key
to return to the previous menu.
8.5.1 Jog settings
When the "red selection box" stops on the item and press the [Enter] key, the following interface will pop
up:
Figure 8.5.1-1
1. As shown in the figure above, press the key
on the panel, select [Read], and press the [Enter]
key (the selected input box will change from black to red).
2. Select [Jog Mode], press [Enter] to enter the setting state, press
to select "Jog" or
"Continuous" mode, after setting, press [Enter] to save the modified parameters.
3. Press the key on the panel, select "Jog distance", press the [Enter] key, press
to move the
underline, press the key to make the underline value larger; press the button on the panel to
make the underline value smaller.
4. After setting, press [Enter] to save the modified parameters.
5. Finally select [write and press [Enter] to save the modified parameters, and press [ESC] to exit this
interface.
When the jog mode is "continuous", the jog parameter has no effect. When returning to the main
interface, press the direction key, the axis moves, and when the direction key pops up, the axis stops
moving. When the jog mode is "Jog", the corresponding motion axis will run once every time you press
the direction key, and run distance is equal to the jog distance value set by the user (in the case of not
exceeding the machine format).
SHENZHEN RUIDA TECHNOLOGY
33
