2024-05-29|21:40:01.999|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|21:40:02.155|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|21:41:24.835|WARN |778|550|Active| Cannot be executed until the machine is out of E-stop (All axes are disabled) 
2024-05-29|21:41:26.913|INFO |778|550|Inactive| Cannot be executed until the machine is out of E-stop (All axes are disabled) 
2024-05-29|21:41:27.882|WARN |20000|550|Active|Axis is not enabled, please click the "enable" button of HMI to enable the axis
2024-05-29|21:44:09.110|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|21:44:09.274|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|21:44:09.290|WARN |20021|550|Active|Machine tool axis not all return to zero
2024-05-29|21:45:09.098|WARN |9044|550|Active|X Axis past min hard limit !
2024-05-29|21:45:17.080|INFO |9044|550|Inactive|X Axis past min hard limit !
2024-05-29|21:46:48.088|WARN |9045|550|Active|Y Axis past min hard limit
2024-05-29|21:47:04.827|WARN |31|550|Active|Z Axis past max hard limit 
2024-05-29|21:47:16.089|INFO |9045|550|Inactive|Y Axis past min hard limit
2024-05-29|21:47:17.855|INFO |31|550|Inactive|Z Axis past max hard limit 
2024-05-29|21:47:43.400|INFO |77|550|Inactive|F Axis past min hard limit  
2024-05-29|21:47:45.415|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|21:47:45.431|WARN |10249|550|Active|Ferror in home state,Please confirm if the axis movement direction and limit wiring are correct 
2024-05-29|21:48:01.376|WARN |68|550|Active|nitrogen pressure DI alarm
2024-05-29|21:48:02.475|INFO |68|550|Inactive|nitrogen pressure DI alarm
2024-05-29|21:48:11.439|INFO |10249|550|Inactive|Ferror in home state,Please confirm if the axis movement direction and limit wiring are correct 
2024-05-29|21:48:21.618|WARN |953|550|Active|Cool Water Machine Alarm
2024-05-29|21:48:22.261|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|21:48:22.277|INFO |953|550|Inactive|Cool Water Machine Alarm
2024-05-29|21:48:24.023|WARN |953|550|Active|Cool Water Machine Alarm
2024-05-29|21:48:25.456|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|21:48:25.475|INFO |953|550|Inactive|Cool Water Machine Alarm
2024-05-29|21:50:09.574|INFO |20021|550|Inactive|Machine tool axis not all return to zero
2024-05-29|21:50:10.011|WARN |20021|550|Active|Machine tool axis not all return to zero
2024-05-29|21:50:10.027|INFO |77|550|Inactive|F Axis past min hard limit  
2024-05-29|21:50:10.449|WARN |76|550|Active|F Axis past max hard limit  
2024-05-29|21:50:10.464|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|21:50:10.480|WARN |1124|550|Active|The positive limit is triggered when the negative F-axis returns to zero. Please confirm whether the axis movement direction and the limit wiring are correct!
2024-05-29|21:50:13.292|INFO |20021|550|Inactive|Machine tool axis not all return to zero
2024-05-29|21:50:24.682|WARN |20021|550|Active|Machine tool axis not all return to zero
2024-05-29|21:50:24.791|WARN |76|550|Active|F Axis past max hard limit  
2024-05-29|21:50:24.807|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|21:50:24.822|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|21:50:37.707|WARN |1124|550|Active|The positive limit is triggered when the negative F-axis returns to zero. Please confirm whether the axis movement direction and the limit wiring are correct!
2024-05-29|21:58:56.173|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|21:58:56.329|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|21:58:56.345|WARN |20021|550|Active|Machine tool axis not all return to zero
2024-05-29|21:59:00.892|INFO |77|550|Inactive|F Axis past min hard limit  
2024-05-29|21:59:01.360|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|21:59:03.048|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|21:59:03.048|WARN |10249|550|Active|Ferror in home state,Please confirm if the axis movement direction and limit wiring are correct 
2024-05-29|21:59:04.354|INFO |20021|550|Inactive|Machine tool axis not all return to zero
2024-05-29|22:00:39.081|INFO |10249|550|Inactive|Ferror in home state,Please confirm if the axis movement direction and limit wiring are correct 
2024-05-29|22:00:54.615|WARN |20021|550|Active|Machine tool axis not all return to zero
2024-05-29|22:07:13.379|WARN |68|550|Active|nitrogen pressure DI alarm
2024-05-29|22:07:14.468|INFO |68|550|Inactive|nitrogen pressure DI alarm
2024-05-29|22:07:49.477|WARN |68|550|Active|nitrogen pressure DI alarm
2024-05-29|22:07:50.236|INFO |68|550|Inactive|nitrogen pressure DI alarm
2024-05-29|22:12:18.414|WARN |6|550|Active|Touch plate error
2024-05-29|22:12:20.274|INFO |6|550|Inactive|Touch plate error
2024-05-29|22:12:20.383|WARN |6|550|Active|Touch plate error
2024-05-29|22:12:21.149|INFO |6|550|Inactive|Touch plate error
2024-05-29|22:12:21.367|WARN |6|550|Active|Touch plate error
2024-05-29|22:12:21.805|INFO |6|550|Inactive|Touch plate error
2024-05-29|22:12:21.914|WARN |6|550|Active|Touch plate error
2024-05-29|22:12:22.024|INFO |6|550|Inactive|Touch plate error
2024-05-29|22:12:22.242|WARN |6|550|Active|Touch plate error
2024-05-29|22:12:22.461|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|22:12:23.992|INFO |6|550|Inactive|Touch plate error
2024-05-29|22:12:25.086|WARN |6|550|Active|Touch plate error
2024-05-29|22:12:34.179|INFO |6|550|Inactive|Touch plate error
2024-05-29|22:12:34.288|WARN |6|550|Active|Touch plate error
2024-05-29|22:12:36.148|INFO |6|550|Inactive|Touch plate error
2024-05-29|22:12:36.257|WARN |6|550|Active|Touch plate error
2024-05-29|22:12:45.553|INFO |6|550|Inactive|Touch plate error
2024-05-29|22:12:49.162|WARN |6|550|Active|Touch plate error
2024-05-29|22:12:50.693|INFO |6|550|Inactive|Touch plate error
2024-05-29|22:13:07.857|WARN |67|550|Active|oxygen pressure DI alarm
2024-05-29|22:13:10.148|INFO |67|550|Inactive|oxygen pressure DI alarm
2024-05-29|22:13:31.931|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|22:13:31.931|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|22:17:05.986|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|22:17:06.142|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|22:17:06.158|WARN |20021|550|Active|Machine tool axis not all return to zero
2024-05-29|23:20:29.898|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|23:20:30.039|WARN |20021|550|Active|Machine tool axis not all return to zero
2024-05-29|23:20:59.219|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|23:23:51.462|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|23:23:51.618|WARN |20021|550|Active|Machine tool axis not all return to zero
2024-05-29|23:24:08.770|WARN |1073|550|Active|EDS3000 capacitance Abnormal
2024-05-29|23:24:08.989|WARN |90|550|Active|slaves can not connect to master (All axes are disabled)
2024-05-29|23:24:09.005|WARN |20023|550|Active|EtherCAT network error is detected, all axes are disabled, a reset operation must be executed
2024-05-29|23:24:09.099|WARN |790|550|Active|Axis F not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:09.114|WARN |90|550|Active|EtherCAT network alarm (Slaves   0not in operation)
2024-05-29|23:24:11.177|INFO |790|550|Inactive|Axis F not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:11.505|WARN |790|550|Active|Axis F not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:12.270|INFO |1073|550|Inactive|EDS3000 capacitance Abnormal
2024-05-29|23:24:12.380|WARN |789|550|Active|Axis Z not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:12.395|WARN |788|550|Active|Axis Y1 not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:12.426|WARN |787|550|Active|Axis X not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:12.442|WARN |786|550|Active|Axis Y not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:13.364|INFO |790|550|Inactive|Axis F not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:13.395|INFO |789|550|Inactive|Axis Z not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:13.411|INFO |788|550|Inactive|Axis Y1 not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:13.442|INFO |787|550|Inactive|Axis X not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:13.473|INFO |786|550|Inactive|Axis Y not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:13.520|WARN |786|550|Active|Axis Y not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:13.551|WARN |787|550|Active|Axis X not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:13.583|WARN |788|550|Active|Axis Y1 not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:13.614|WARN |790|550|Active|Axis F not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:13.629|WARN |789|550|Active|Axis Z not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:13.801|WARN |1073|550|Active|EDS3000 capacitance Abnormal
2024-05-29|23:24:14.239|INFO |790|550|Inactive|Axis F not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:14.270|INFO |789|550|Inactive|Axis Z not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:14.286|INFO |788|550|Inactive|Axis Y1 not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:14.317|INFO |787|550|Inactive|Axis X not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:14.348|INFO |786|550|Inactive|Axis Y not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:24:40.596|WARN |20024|550|Active|Height sensor is offline，try to clear the alarm first, or power off the whole machine and power on again
2024-05-29|23:25:10.672|WARN |953|550|Active|Cool Water Machine Alarm
2024-05-29|23:25:11.438|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|23:25:11.469|INFO |953|550|Inactive|Cool Water Machine Alarm
2024-05-29|23:25:12.422|WARN |953|550|Active|Cool Water Machine Alarm
2024-05-29|23:25:19.650|WARN |68|550|Active|nitrogen pressure DI alarm
2024-05-29|23:25:20.734|INFO |68|550|Inactive|nitrogen pressure DI alarm
2024-05-29|23:25:32.442|WARN |68|550|Active|nitrogen pressure DI alarm
2024-05-29|23:25:33.210|INFO |68|550|Inactive|nitrogen pressure DI alarm
2024-05-29|23:25:50.712|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|23:25:50.753|INFO |953|550|Inactive|Cool Water Machine Alarm
2024-05-29|23:25:52.266|WARN |953|550|Active|Cool Water Machine Alarm
2024-05-29|23:33:57.395|WARN |1073|550|Active|EDS3000 capacitance Abnormal
2024-05-29|23:33:57.551|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|23:33:57.567|WARN |790|550|Active|Axis F not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:33:57.583|WARN |789|550|Active|Axis Z not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:33:57.583|WARN |788|550|Active|Axis Y1 not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:33:57.598|WARN |787|550|Active|Axis X not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:33:57.630|WARN |786|550|Active|Axis Y not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:33:57.645|WARN |778|550|Active| Cannot be executed until the machine is out of E-stop (All axes are disabled) 
2024-05-29|23:33:57.661|WARN |142|550|Active|Capacitance is zero and the data line is broken.
2024-05-29|23:33:57.692|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|23:33:57.723|WARN |76|550|Active|F Axis past max hard limit  
2024-05-29|23:33:57.755|WARN |34|550|Active|Z Axis past min hard limit
2024-05-29|23:33:57.786|WARN |31|550|Active|Z Axis past max hard limit 
2024-05-29|23:33:57.817|WARN |6|550|Active|Touch plate error
2024-05-29|23:33:57.864|WARN |20021|550|Active|Machine tool axis not all return to zero
2024-05-29|23:33:57.895|WARN |90|550|Active|slaves can not connect to master (All axes are disabled)
2024-05-29|23:33:57.942|WARN |20023|550|Active|EtherCAT network error is detected, all axes are disabled, a reset operation must be executed
2024-05-29|23:33:58.301|WARN |90|550|Active|EtherCAT network alarm (Slaves   0not in operation)
2024-05-29|23:33:58.333|INFO |1073|550|Inactive|EDS3000 capacitance Abnormal
2024-05-29|23:33:58.411|INFO |790|550|Inactive|Axis F not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:33:58.458|INFO |789|550|Inactive|Axis Z not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:33:58.520|INFO |788|550|Inactive|Axis Y1 not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:33:58.567|INFO |787|550|Inactive|Axis X not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:33:58.614|INFO |786|550|Inactive|Axis Y not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:33:58.661|INFO |778|550|Inactive| Cannot be executed until the machine is out of E-stop (All axes are disabled) 
2024-05-29|23:33:58.692|INFO |142|550|Inactive|Capacitance is zero and the data line is broken.
2024-05-29|23:33:58.739|INFO |77|550|Inactive|F Axis past min hard limit  
2024-05-29|23:33:58.770|INFO |76|550|Inactive|F Axis past max hard limit  
2024-05-29|23:33:58.817|INFO |34|550|Inactive|Z Axis past min hard limit
2024-05-29|23:33:58.864|INFO |31|550|Inactive|Z Axis past max hard limit 
2024-05-29|23:33:58.911|INFO |6|550|Inactive|Touch plate error
2024-05-29|23:33:58.942|INFO |90|550|Inactive|EtherCAT network alarm (Slaves   0not in operation)
2024-05-29|23:33:58.989|INFO |20023|550|Inactive|EtherCAT network error is detected, all axes are disabled, a reset operation must be executed
2024-05-29|23:33:59.067|WARN |20000|550|Active|Axis is not enabled, please click the "enable" button of HMI to enable the axis
2024-05-29|23:33:59.114|WARN |1073|550|Active|EDS3000 capacitance Abnormal
2024-05-29|23:33:59.145|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|23:33:59.208|WARN |778|550|Active| Cannot be executed until the machine is out of E-stop (All axes are disabled) 
2024-05-29|23:33:59.239|WARN |142|550|Active|Capacitance is zero and the data line is broken.
2024-05-29|23:33:59.286|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|23:33:59.333|WARN |76|550|Active|F Axis past max hard limit  
2024-05-29|23:33:59.379|WARN |34|550|Active|Z Axis past min hard limit
2024-05-29|23:33:59.426|WARN |31|550|Active|Z Axis past max hard limit 
2024-05-29|23:33:59.473|WARN |6|550|Active|Touch plate error
2024-05-29|23:33:59.536|WARN |90|550|Active|EtherCAT network alarm (Slaves   0not in operation)
2024-05-29|23:33:59.583|WARN |20023|550|Active|EtherCAT network error is detected, all axes are disabled, a reset operation must be executed
2024-05-29|23:33:59.692|INFO |20000|550|Inactive|Axis is not enabled, please click the "enable" button of HMI to enable the axis
2024-05-29|23:34:02.910|WARN |20037|550|Active| The difference between the current capacitance and that recorded last time is too large. Please do sensor calibration!
2024-05-29|23:36:50.366|WARN |953|550|Active|Cool Water Machine Alarm
2024-05-29|23:36:51.459|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|23:36:51.490|INFO |953|550|Inactive|Cool Water Machine Alarm
2024-05-29|23:36:53.100|WARN |953|550|Active|Cool Water Machine Alarm
2024-05-29|23:36:57.924|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|23:36:57.964|INFO |953|550|Inactive|Cool Water Machine Alarm
2024-05-29|23:37:00.105|WARN |20000|550|Active|Axis is not enabled, please click the "enable" button of HMI to enable the axis
2024-05-29|23:37:00.105|WARN |31|550|Active|Z Axis past max hard limit 
2024-05-29|23:37:00.121|WARN |34|550|Active|Z Axis past min hard limit
2024-05-29|23:37:00.137|WARN |76|550|Active|F Axis past max hard limit  
2024-05-29|23:37:00.168|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|23:37:00.184|WARN |6|550|Active|Touch plate error
2024-05-29|23:37:00.199|WARN |778|550|Active| Cannot be executed until the machine is out of E-stop (All axes are disabled) 
2024-05-29|23:37:00.230|WARN |142|550|Active|Capacitance is zero and the data line is broken.
2024-05-29|23:37:00.262|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|23:37:00.293|WARN |1073|550|Active|EDS3000 capacitance Abnormal
2024-05-29|23:37:00.324|WARN |90|550|Active|slaves can not connect to master (All axes are disabled)
2024-05-29|23:37:00.355|WARN |20023|550|Active|EtherCAT network error is detected, all axes are disabled, a reset operation must be executed
2024-05-29|23:37:00.465|INFO |20000|550|Inactive|Axis is not enabled, please click the "enable" button of HMI to enable the axis
2024-05-29|23:37:07.545|WARN |953|550|Active|Cool Water Machine Alarm
2024-05-29|23:40:33.520|WARN |1073|550|Active|EDS3000 capacitance Abnormal
2024-05-29|23:40:33.676|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|23:40:33.676|WARN |790|550|Active|Axis F not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:40:33.692|WARN |789|550|Active|Axis Z not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:40:33.708|WARN |788|550|Active|Axis Y1 not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:40:33.723|WARN |787|550|Active|Axis X not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:40:33.739|WARN |786|550|Active|Axis Y not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:40:33.770|WARN |778|550|Active| Cannot be executed until the machine is out of E-stop (All axes are disabled) 
2024-05-29|23:40:33.786|WARN |142|550|Active|Capacitance is zero and the data line is broken.
2024-05-29|23:40:33.817|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|23:40:33.848|WARN |76|550|Active|F Axis past max hard limit  
2024-05-29|23:40:33.864|WARN |34|550|Active|Z Axis past min hard limit
2024-05-29|23:40:33.911|WARN |31|550|Active|Z Axis past max hard limit 
2024-05-29|23:40:33.942|WARN |6|550|Active|Touch plate error
2024-05-29|23:40:33.973|WARN |20021|550|Active|Machine tool axis not all return to zero
2024-05-29|23:40:34.020|WARN |90|550|Active|slaves can not connect to master (All axes are disabled)
2024-05-29|23:40:34.067|WARN |20023|550|Active|EtherCAT network error is detected, all axes are disabled, a reset operation must be executed
2024-05-29|23:40:34.364|WARN |90|550|Active|EtherCAT network alarm (Slaves   0not in operation)
2024-05-29|23:40:34.364|INFO |790|550|Inactive|Axis F not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:40:34.411|INFO |789|550|Inactive|Axis Z not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:40:34.458|INFO |788|550|Inactive|Axis Y1 not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:40:34.520|INFO |787|550|Inactive|Axis X not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:40:34.567|INFO |786|550|Inactive|Axis Y not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:40:39.598|WARN |20037|550|Active| The difference between the current capacitance and that recorded last time is too large. Please do sensor calibration!
2024-05-29|23:51:33.982|WARN |1073|550|Active|EDS3000 capacitance Abnormal
2024-05-29|23:51:34.138|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|23:51:34.138|WARN |790|550|Active|Axis F not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:51:34.154|WARN |789|550|Active|Axis Z not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:51:34.169|WARN |788|550|Active|Axis Y1 not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:51:34.185|WARN |787|550|Active|Axis X not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:51:34.201|WARN |786|550|Active|Axis Y not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:51:34.232|WARN |778|550|Active| Cannot be executed until the machine is out of E-stop (All axes are disabled) 
2024-05-29|23:51:34.247|WARN |142|550|Active|Capacitance is zero and the data line is broken.
2024-05-29|23:51:34.279|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|23:51:34.310|WARN |76|550|Active|F Axis past max hard limit  
2024-05-29|23:51:34.341|WARN |34|550|Active|Z Axis past min hard limit
2024-05-29|23:51:34.372|WARN |31|550|Active|Z Axis past max hard limit 
2024-05-29|23:51:34.404|WARN |6|550|Active|Touch plate error
2024-05-29|23:51:34.450|WARN |20021|550|Active|Machine tool axis not all return to zero
2024-05-29|23:51:34.482|WARN |90|550|Active|slaves can not connect to master (All axes are disabled)
2024-05-29|23:51:34.560|WARN |20023|550|Active|EtherCAT network error is detected, all axes are disabled, a reset operation must be executed
2024-05-29|23:51:34.904|WARN |90|550|Active|EtherCAT network alarm (Slaves   0not in operation)
2024-05-29|23:51:35.044|INFO |790|550|Inactive|Axis F not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:51:35.091|INFO |789|550|Inactive|Axis Z not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:51:35.138|INFO |788|550|Inactive|Axis Y1 not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:51:35.185|INFO |787|550|Inactive|Axis X not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:51:35.232|INFO |786|550|Inactive|Axis Y not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:51:38.653|WARN |20037|550|Active| The difference between the current capacitance and that recorded last time is too large. Please do sensor calibration!
2024-05-29|23:54:41.965|WARN |1073|550|Active|EDS3000 capacitance Abnormal
2024-05-29|23:54:42.121|INFO |965|550|Active|Cool Water Machine Alarm(The shutter is not open, and the alarm only serves as a prompt)
2024-05-29|23:54:42.121|WARN |790|550|Active|Axis F not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:54:42.137|WARN |789|550|Active|Axis Z not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:54:42.152|WARN |788|550|Active|Axis Y1 not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:54:42.168|WARN |787|550|Active|Axis X not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:54:42.183|WARN |786|550|Active|Axis Y not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:54:42.215|WARN |778|550|Active| Cannot be executed until the machine is out of E-stop (All axes are disabled) 
2024-05-29|23:54:42.230|WARN |142|550|Active|Capacitance is zero and the data line is broken.
2024-05-29|23:54:42.262|WARN |77|550|Active|F Axis past min hard limit  
2024-05-29|23:54:42.293|WARN |76|550|Active|F Axis past max hard limit  
2024-05-29|23:54:42.324|WARN |34|550|Active|Z Axis past min hard limit
2024-05-29|23:54:42.355|WARN |31|550|Active|Z Axis past max hard limit 
2024-05-29|23:54:42.387|WARN |6|550|Active|Touch plate error
2024-05-29|23:54:42.433|WARN |20021|550|Active|Machine tool axis not all return to zero
2024-05-29|23:54:42.465|WARN |90|550|Active|slaves can not connect to master (All axes are disabled)
2024-05-29|23:54:42.527|WARN |20023|550|Active|EtherCAT network error is detected, all axes are disabled, a reset operation must be executed
2024-05-29|23:54:42.855|WARN |90|550|Active|EtherCAT network alarm (Slaves   0not in operation)
2024-05-29|23:54:42.871|INFO |790|550|Inactive|Axis F not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:54:42.902|INFO |789|550|Inactive|Axis Z not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:54:42.949|INFO |788|550|Inactive|Axis Y1 not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:54:42.996|INFO |787|550|Inactive|Axis X not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:54:43.043|INFO |786|550|Inactive|Axis Y not enabled, not operational, please check whether the power cable and encoder cable are loose
2024-05-29|23:54:48.964|WARN |20037|550|Active| The difference between the current capacitance and that recorded last time is too large. Please do sensor calibration!