CHAPTER 6 KEYPAD

(3) Rotation speed U／L

Pd_3

SET

(1 sec. or over)

----

Blinks three

ESC

times.

60

Set the travel speed to the motor target position. Use the

motor shaft rotation speed for the setting value. The setting

value range is from 0.01 to 6000.00 r/min in increments of

0.01.

Note that the setting speed is not the machine travel

speed.

SHIFT

----

Blinks three times.

ESC

00.00

6

(4) Stand still timer U／L

Pd_4

Set the stop time after the motor has reached the target

position. The setting value range is from 0.00 to 655.35 s in

increments of 0.01.

SET

---- (1 sec. or over) After the stop time has elapsed, the sequence output signal

(in-position signal [INP]) turns on.

ESC

Blinks three

times.

6

The decimal point position can be changed in the

parameter PA2-42 (timer data decimal point position).

SHIFT

----

Blinks three times.

ESC

55.35

Positioning Data Edit Mode 6-41