CHAPTER 6 KEYPAD

6.1.2 Key

[MODE/ESC]

 The mode is switched (MODE).

 The mode is deselected (ESC).

[SET/SHIFT]

 The cursor digit shifts to the right

(SHIFT).

 The mode or value settles (SET).

 Press and hold for at least one

second to settle.

[]

The sub mode is selected.

The value increases by one (+1).

[]

The sub mode is selected.

The value decreases by one (-1).

 To show five or more digits, alternate the upper and lower four digits.

 To show nine or more digits, alternate the upper, middle and lower four digits sequentially.

6.1.3 Blinking Display

6

The keypad display blinks with some statuses.

The table below shows the statuses and contents regarding blinking display.

Blink interval

0.5 sec cycle

0.5 sec cycle

Duration

Continuously

3 sec

Once every 2 sec Continuously

Twice every 2 sec Continuously

Status

Alarm

Parameter being

confirmed

During sequence test

mode

Cycle the power.*

How to recover

Cycle the power or reset the alarm.

-

Cycle the power, or cycle the power

after changed to PA2_89 = 0.

Cycle the power.

* When a parameter which becomes enabled after cycling the power is changed.

6.1.4 Displaying Upper/middle/lower Data

The display of the item described with U／L is shown with upper/middle/lower digits.

---- Blinks three times: upper digits

---- Blinks three times: middle digits

----

Blinks three times: lower digits

* With some items the middle digit display is not used.

Display 6-3