Send Quote Requests to info@automatedpt.com

ASDA-A3

Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com

Parameters

P5.083

E-Cam: master gear ratio setting - cycle number (M)

Address: 05A6H

05A7H

Default: 1

Control mode: PR

Unit: -

Setting range: 1 to 32767

Format: DEC

Data size: 16-bit

Settings:

When the slave axis receives the pulse number of the master axis defined by P5.084, E-Cam rotates the

number of cycles defined by P5.083 (one cycle of E-Cam = rotate from 0° to 360°). This parameter is

only writable when E-Cam stops (P5.088.X [Bit 0] = 0).

8

P5.084

E-Cam: master gear ratio setting - pulse number (P)

Address: 05A8H

05A9H

Default: 3600

Control mode: PR

Unit: -

Setting range: 10 to 1073741823

Format: DEC

Data size: 32-bit

Settings:

When the slave axis receives the pulse number of the master axis defined by P5.084, E-Cam rotates the

number of cycles defined by P5.083 (one cycle of E-Cam = rotate from 0° to 360°). This parameter can

be modified at any time. Its range must be greater than or equal to the value of P5.082 x P5.083, and

the value of P5.082 x P5.084 must be smaller than or equal to 2147483647.

P5.085

E-Cam: engaged segment number

Address: 05AAH

05ABH

Default: 0

Control mode: PR

Unit: -

Setting range: 0 to (value set by P5.082 minus 1)

Format: DEC

Data size: 16-bit

Settings:

Sets the segment number in the curve table when E-Cam engages.

P5.086■ E-Cam: master axis position

Default: 0

Unit: Pulse unit of master axis

Format: DEC

Address: 05ACH

05ADH

Control mode: PR

Setting range: -2147483648 to +2147483647

Data size: 32-bit

Settings:

Position counter of the E-Cam master axis. When E-Cam is in operation, this value increases

continuously. This parameter is only writable when E-Cam stops (P5.088.X [Bit 0] = 0).

Send Quote Requests to info@automatedpt.com

Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com

8-187