Send Quote Requests to info@automatedpt.com

ASDA-A3

Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com

Parameters

P5.034

Acceleration / deceleration time #14

Address: 0544H

0545H

Default: 50

Unit:

ms (P2.068.U = 0)

10 ms (P2.068.U =

1)

Format: DEC

Control mode: PR

Setting range: 1 to 1500

Data size: 16-bit

Settings:

The deceleration time setting for auto-protection. The default value is small for faster deceleration.

8

P5.035

Acceleration / deceleration time #15

Address: 0546H

0547H

Default: 30

Unit:

ms (P2.068.U = 0)

10 ms (P2.068.U =

1)

Format: DEC

Control mode: PR

Setting range: 1 to 1200

Data size: 16-bit

Settings:

The deceleration time for auto-protection. The default value is small for faster deceleration.

P5.036

Capture: start address of data array

Address: 0548H

0549H

Default: 0

Control mode: All

Unit: -

Setting range: 0 to (value set by P5.010 minus 1)

Format: DEC

Data size: 16-bit

Settings:

Specifies the address of the data array to save the first data to be captured. This parameter is only

writable when Capture stops (refer to P5.039).

P5.037■ Capture: axis position

Default: 0

Unit: Pulse unit of capture source

Format: DEC

Address: 054AH

054BH

Control mode: All

Setting range: -2147483648 to +2147483647

Data size: 32-bit

Settings:

Displays the axis position of the Capture pulse source. Note that this parameter is only writable when

Capture stops (refer to P5.039). If the pulse source of Capture is the main encoder, this parameter is

write-protected and the axis position is the feedback position of the motor (monitoring variable 00h).

Send Quote Requests to info@automatedpt.com

Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com

8-171